#
# tests that require InnoDB...
#

-- source include/have_log_bin.inc
-- source include/have_innodb.inc

--disable_warnings
drop table if exists t1, t2, t3;
--enable_warnings

delimiter |;

#
# BUG#8850: Truncate table in a stored procedure locks the tables
#
--disable_warnings
drop procedure if exists bug8850|
--enable_warnings
create table t1 (a int) engine=innodb|
create procedure bug8850()
begin
  truncate table t1; insert t1 values (1); rollback;
end|

set autocommit=0|
insert t1 values (2)|
call bug8850()|
commit|
select * from t1|

call bug8850()|
set autocommit=1|
select * from t1|
drop table t1|
drop procedure bug8850|


#
# BUG#10015: Crash in InnoDB if stored routines are used
# (crash happens in auto-commit mode)
#
--disable_warnings
drop function if exists bug10015_1|
drop function if exists bug10015_2|
drop function if exists bug10015_3|
drop function if exists bug10015_4|
drop function if exists bug10015_5|
drop function if exists bug10015_6|
drop function if exists bug10015_7|
drop procedure if exists bug10015_8|
--enable_warnings
create table t1 (id int) engine=innodb|
create table t2 (id int primary key, j int) engine=innodb|
insert into t1 values (1),(2),(3)|
create function bug10015_1() returns int return (select count(*) from t1)|
select *, bug10015_1() from t1|
drop function bug10015_1|
# Test couple of a bit more complex cases
create function bug10015_2() returns int 
  begin
    declare i, s int;
    set i:= (select min(id) from t1);
    set s:= (select max(id) from t1);
    return (s - i);
  end|
select *, bug10015_2() from t1|
drop function bug10015_2|
create function bug10015_3() returns int 
  return (select max(a.id - b.id) from t1 as a, t1 as b where a.id >= b.id)|
select *, bug10015_3() from t1|
drop function bug10015_3|
create function bug10015_4(i int) returns int 
  begin
    declare m int;
    set m:= (select max(id) from t2);
    insert into t2 values (i, m);
    return m;
  end|
select *, bug10015_4(id) from t1|
select * from t2|
drop function bug10015_4|
# Now let us test how statement rollback works
# This function will cause the whole stmt to be rolled back,
# there should not be any traces left.
create function bug10015_5(i int) returns int
  begin
    if (i = 5) then
      insert into t2 values (1, 0);
    end if;
    return i;
  end|
--error 1062
insert into t1 values (bug10015_5(4)), (bug10015_5(5))|
select * from t1|
drop function bug10015_5|
# Thanks to error-handler this function should not cause rollback
# of statement calling it. But insert statement in it should be 
# rolled back completely and don't leave any traces in t2.
# Unfortunately we can't implement such behavior in 5.0, so it
# is something to be fixed in later 5.* releases (TODO).
create function bug10015_6(i int) returns int
  begin
    declare continue handler for sqlexception set @error_in_func:= 1;
    if (i = 5) then
      insert into t2 values (4, 0), (1, 0);
    end if;
    return i;
  end|
set @error_in_func:= 0|
insert into t1 values (bug10015_6(5)), (bug10015_6(6))|
select @error_in_func|
select * from t1|
select * from t2|
drop function bug10015_6|
# Let us test that we don't allow any statements causing transaction
# commit in stored functions (we test only most interesting cases here).
# Cases which can be caught at creation time:
--error 1422
create function bug10015_7() returns int
  begin
    alter table t1 add k int;
    return 1;
  end|
--error 1422
create function bug10015_7() returns int
  begin
    start transaction;
    return 1;
  end|
--error 1422
create function bug10015_7() returns int
  begin
    drop table t1;
    return 1;
  end|
# It should be OK to drop temporary table.
create function bug10015_7() returns int
  begin
    drop temporary table t1;
    return 1;
  end|
drop function bug10015_7|
--error 1422
create function bug10015_7() returns int
  begin
    commit;
    return 1;
  end|
# Now let us test cases which we can catch only at run-time:
create function bug10015_7() returns int
  begin
    call bug10015_8();
    return 1;
  end|
create procedure bug10015_8() alter table t1 add k int|
--error 1422
select *, bug10015_7() from t1|
drop procedure bug10015_8|
create procedure bug10015_8() start transaction|
--error 1422
select *, bug10015_7() from t1|
drop procedure bug10015_8|
# Again it is OK to drop temporary table
# We are surpressing warnings since they are not essential
create procedure bug10015_8() drop temporary table if exists t1_temp|
--disable_warnings
select *, bug10015_7() from t1|
--enable_warnings
drop procedure bug10015_8|
create procedure bug10015_8() commit|
--error 1422
select *, bug10015_7() from t1|
drop procedure bug10015_8|
drop function bug10015_7|
drop table t1, t2|


#
# BUG#13825 "Triggers: crash if release savepoint".
# Also general test for handling of savepoints in stored routines.
#
# According to SQL standard we should establish new savepoint
# level before executing stored function/trigger and destroy 
# this savepoint level after execution. Stored procedures by
# default should be executed using the same savepoint level
# as their caller (to execute stored procedure using new 
# savepoint level one should explicitly specify NEW SAVEPOINT
# LEVEL clause in procedure creation statement which MySQL
# does not support yet).
--disable_warnings
drop function if exists bug13825_0|
drop function if exists bug13825_1|
drop function if exists bug13825_2|
drop function if exists bug13825_3|
drop function if exists bug13825_4|
drop function if exists bug13825_5|
drop procedure if exists bug13825_0|
drop procedure if exists bug13825_1|
drop procedure if exists bug13825_2|
drop table if exists t1|
--enable_warnings
create table t1 (i int) engine=innodb|
create table t2 (i int) engine=innodb|
create function bug13825_0() returns int
begin
  rollback to savepoint x;
  return 1;
end|
create function bug13825_1() returns int
begin
  release savepoint x;
  return 1;
end|
create function bug13825_2() returns int
begin
  insert into t1 values (2);
  savepoint x;
  insert into t1 values (3);
  rollback to savepoint x;
  insert into t1 values (4);
  return 1;
end|
create procedure bug13825_0()
begin
  rollback to savepoint x;
end|
create procedure bug13825_1()
begin
  release savepoint x;
end|
create procedure bug13825_2()
begin
  savepoint x;
end|
insert into t2 values (1)|
create trigger t2_bi before insert on t2 for each row
  rollback to savepoint x|
create trigger t2_bu before update on t2 for each row
  release savepoint x|
create trigger t2_bd before delete on t2 for each row
begin
  insert into t1 values (2);
  savepoint x;
  insert into t1 values (3);
  rollback to savepoint x;
  insert into t1 values (4);
end|
create function bug13825_3(rb int) returns int
begin
  insert into t1 values(1);
  savepoint x;
  insert into t1 values(2);
  if rb then
    rollback to savepoint x;
  end if;
  insert into t1 values(3);
  return rb;
end|
create function bug13825_4() returns int
begin
  savepoint x;
  insert into t1 values(2);
  rollback to savepoint x;
  return 0;
end|
create function bug13825_5(p int) returns int
begin
  savepoint x;
  insert into t2 values(p);
  rollback to savepoint x;
  insert into t2 values(p+1);
  return p;
end|
set autocommit= 0|
# Test of savepoint level handling for stored functions and triggers
begin |
insert into t1 values (1)|
savepoint x|
--error ER_SP_DOES_NOT_EXIST
set @a:= bug13825_0()|
--error ER_SP_DOES_NOT_EXIST
insert into t2 values (2)|
--error ER_SP_DOES_NOT_EXIST
set @a:= bug13825_1()|
--error ER_SP_DOES_NOT_EXIST
update t2 set i = 2|
set @a:= bug13825_2()|
select * from t1|
rollback to savepoint x|
select * from t1|
delete from t2|
select * from t1|
rollback to savepoint x|
select * from t1|
# Of course savepoints set in function should not be visible from its caller
release savepoint x|
set @a:= bug13825_2()|
select * from t1|
--error ER_SP_DOES_NOT_EXIST
rollback to savepoint x|
delete from t1|
commit|
# Test of savepoint level handling for stored procedures
begin|
insert into t1 values (5)|
savepoint x|
insert into t1 values (6)|
call bug13825_0()|
select * from t1|
call bug13825_1()|
--error ER_SP_DOES_NOT_EXIST
rollback to savepoint x|
savepoint x|
insert into t1 values (7)|
call bug13825_2()|
rollback to savepoint x|
select * from t1|
delete from t1|
commit|
set autocommit= 1|
# Let us test that savepoints work inside of functions
# even in auto-commit mode
select bug13825_3(0)|
select * from t1|
delete from t1|
select bug13825_3(1)|
select * from t1|
delete from t1|
# Curious case: rolling back to savepoint which is set by first
# statement in function should not rollback whole transaction.
set autocommit= 0|
begin|
insert into t1 values (1)|
set @a:= bug13825_4()|
select * from t1|
delete from t1|
commit|
set autocommit= 1|
# Other curious case: savepoint in the middle of statement
drop table t2|
create table t2 (i int) engine=innodb|
insert into t1 values (1), (bug13825_5(2)), (3)|
select * from t1|
select * from t2|
# Cleanup
drop function bug13825_0|
drop function bug13825_1|
drop function bug13825_2|
drop function bug13825_3|
drop function bug13825_4|
drop function bug13825_5|
drop procedure bug13825_0|
drop procedure bug13825_1|
drop procedure bug13825_2|
drop table t1, t2|


#
# BUG#14840: CONTINUE handler problem
#
--disable_warnings
drop table if exists t3|
drop procedure if exists bug14840_1|
drop procedure if exists bug14840_2|
--enable_warnings

create table t3
(
  x int,
  y int,
  primary key (x)
) engine=InnoDB|

# This used to hang the client since the insert returned with an
# error status (left over from the update) even though it succeeded,
# which caused the execution to end at that point.
create procedure bug14840_1()
begin
  declare err int default 0;
  declare continue handler for sqlexception
    set err = err + 1;

  start transaction;
  update t3 set x = 1, y = 42 where x = 2;
  insert into t3 values (3, 4711);
  if err > 0 then
    rollback;
  else
    commit;
  end if;
  select * from t3;
end|

# A simpler (non-transactional) case: insert at select should be done
create procedure bug14840_2()
begin
  declare err int default 0;
  declare continue handler for sqlexception
    begin
      set err = err + 1;
      select err as 'Ping';
    end;

  update t3 set x = 1, y = 42 where x = 2;
  update t3 set x = 1, y = 42 where x = 2;
  insert into t3 values (3, 4711);
  select * from t3;
end|

insert into t3 values (1, 3), (2, 5)|
call bug14840_1()|

delete from t3|
insert into t3 values (1, 3), (2, 5)|
call bug14840_2()|

drop procedure bug14840_1|
drop procedure bug14840_2|
drop table t3|


#
# BUG#10656: Stored Procedure - Create index and Truncate table command error
#
--disable_warnings
drop procedure if exists bug10656_create_index|
drop procedure if exists bug10656_myjoin|
drop procedure if exists bug10656_truncate_table|
--enable_warnings

CREATE TABLE t3 (
  `ID` int(11) default NULL,
  `txt` char(5) default NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1|

INSERT INTO t3 (`ID`,`txt`) VALUES
 (1,'a'), (2,'b'), (3,'c'), (4,'d')|

CREATE TABLE t4 (
  `ID` int(11) default NULL,
  `txt` char(5) default NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1|

INSERT INTO t4 (`ID`,`txt`) VALUES
 (1,'a'), (2,'b'), (3,'c'), (4,'d')|

create procedure bug10656_create_index()
begin
  create index bug10656_my_index on t3 (ID);
end|
call bug10656_create_index()|

create procedure bug10656_myjoin()
begin
  update t3, t4 set t3.txt = t4.txt where t3.id = t4.id;
end|
call bug10656_myjoin()|

create procedure bug10656_truncate_table()
begin
  truncate table t3;
end|
call bug10656_truncate_table()|


drop procedure bug10656_create_index|
drop procedure bug10656_myjoin|
drop procedure bug10656_truncate_table|
drop table t3, t4|

#
# BUG#3448
#
--disable_warnings
create table t3 (
  a int primary key,
  ach char(1)
) engine = innodb|

create table t4 (
  b int  primary key,
  bch char(1)
) engine = innodb|
--enable_warnings

insert into t3 values (1 , 'aCh1' ) , ('2' , 'aCh2')|
insert into t4 values (1 , 'bCh1' )|

--disable_warnings
drop procedure if exists bug3448|
--enable_warnings
create procedure bug3448()
  select * from t3 inner join t4 on t3.a = t4.b|

select * from t3 inner join t4 on t3.a = t4.b|
call bug3448()|
call bug3448()|

drop procedure bug3448|
drop table t3, t4|

#
# BUG#14210: "Simple query with > operator on large table gives server
# crash"
# Check that cursors work in case when HEAP tables are converted to
# MyISAM
#
--disable_warnings
drop procedure if exists bug14210|
--enable_warnings
set @@session.max_heap_table_size=16384|
select @@session.max_heap_table_size|
# To trigger the memory corruption the original table must be InnoDB.
# No harm if it's not, so don't warn if the suite is run with --skip-innodb
--disable_warnings
create table t3 (a char(255)) engine=InnoDB|
--enable_warnings
create procedure bug14210_fill_table()
begin
  declare table_size, max_table_size int default 0;
  select @@session.max_heap_table_size into max_table_size;
  delete from t3;
  insert into t3 (a) values (repeat('a', 255));
  repeat
    insert into t3 select a from t3;
    select count(*)*255 from t3 into table_size;
  until table_size > max_table_size*2 end repeat;
end|
call bug14210_fill_table()|
drop procedure bug14210_fill_table|
create table t4 like t3|

create procedure bug14210()
begin
  declare a char(255);
  declare done int default 0;
  declare c cursor for select * from t3;
  declare continue handler for sqlstate '02000' set done = 1;
  open c;
  repeat
    fetch c into a;
    if not done then
       insert into t4 values (upper(a));
    end if;
  until done end repeat;
  close c;
end|
call bug14210()|
select count(*) from t4|

drop table t3, t4|
drop procedure bug14210|
set @@session.max_heap_table_size=default|


#
# BUG#NNNN: New bug synopsis
#
#--disable_warnings
#drop procedure if exists bugNNNN|
#--enable_warnings
#create procedure bugNNNN...

delimiter ;|
